| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Ferric Chloride Hexahydrate Anhydrous Manufacturers made in a FDA-GMP plant is offered. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available. |
---------
Ferric Chloride Hexahydrate BP Ph Eur Analytical Reagent & Anhydrous Manufacturers
CAS Number Ferric Chloride Hexahydrate 10025-77-1
CAS Number Ferric Chloride Anhydrous 7705-08-0
Ferric Chloride Hexahydrate BP Grade Ph Eur
FeCl3-6H2O -- 270.3 -- CAS Number 10025-77-1
DEFINITION
Content: 98.0 per cent to 102.0 per cent.
CHARACTERS
Appearance: Crystalline mass or orange-yellow or brownish-yellow crystals, very hygroscopic.
Solubility: Very soluble in water and in ethanol (96 per cent), freely soluble in glycerol.
IDENTIFICATION
A. It gives reaction of chlorides.
B. It gives reaction of iron.
TESTS
Solution S: Dissolve 10 g in distilled water and dilute to 100 ml with the same solvent.
Acidity: In a suitable polyethylene container, dissolve 3.0 g of potassium fluoride in 15 ml of water. Titrate with 0.1 M sodium hydroxide using 0.1 ml of phenolphthalein solution as indicator until a pink colour is obtained. Add 10 ml of solution S and allow to stand for 3 h. Filter and use 12.5 ml of the filtrate. Not more than 0.30 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to pink.
Free chlorine: Heat 5 ml of solution S. The vapour does not turn starch iodide paper blue.
Sulphates: Maximum 100 ppm.
Ferrous ions: Maximum 50 ppm.
Heavy metals: Maximum 50 ppm.
Ferric Chloride Hexahydrate Analytical Reagent Grade
Iron(III) Chloride Hexahydrate
FeCl3-6H2O
Formula Weight 270.30
CAS Number 10025-77-1
REQUIREMENTS
Assay: 97 to 102% FeCl3-6H2O
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.01%
Phosphorus compounds (as PO4): 0.01%
Sulfate (SO4): 0.01%
Copper (Cu): 0.03%
Zinc (Zn): 0.03%
Ferrous iron (Fe++): Passes test
Substances not precipitated by ammonium hydroxide (as sulfates): 0.1%
Specifications of Ferric Chloride Anhydrous:
Appearance: Greenish to Black, Crystalline powder
FeCl3 Assay: 98 %
Ferrous Salt as FeCl2: 0.10 % max
Insolubles: 0.50 % max.
Specific Gravity@25°C: 2.80
Molecular weight: 162.5
Melting Point: 282°C
Solubility: miscible in water.
Labelling according to Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
Signal Words: Danger
Hazard statements:
H290: May be corrosive to metals.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
Ferric Chloride Hexahydrate Anhydrous Manufacturers
Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, etc.
Copyright and Usual Disclaimer is Applicable January 26, 2022