| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Copper Chloride Dihydrate Cupric Chloride Anhydrous Manufacturers made in a FDA-GMP plant is offered. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available. |
---------
Copper Chloride Dihydrate USP Reagent Grade Cupric Chloride Anhydrous Manufacturers
CAS Number Copper Chloride Dihydrate 10125-13-0
CAS Number Copper Chloride Anhydrous 7447-39-4
MSDS Sheet, SDS GHS, Material Safety Data Sheet of Copper Chloride Dihydrate Anhydrous Manufacturers
Cupric Chloride USP
CuCl2-2H2O -- 170.48
Copper chloride (CuCl2) dihydrate.
Copper(2+) chloride dihydrate [CAS Number 10125-13-0].
Anhydrous 134.45 [CAS Number 7447-39-4]
Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.
Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Organic volatile impurities: meets the requirements.
Cupric Chloride Dihydrate Analytical reagent Grade
Copper (II) Chloride Dihydrate
CuCl2-2H2O
Formula Wt 170.48
CAS Number 10125-13-0
REQUIREMENTS
Assay: ≥99.0% CuCl2-2H2O
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.015%
Sulfate (SO4): 0.005%
Calcium (Ca): 0.005%
Iron (Fe): 0.005%
Nickel (Ni): 0.01%
Potassium (K): 0.01%
Sodium (Na): 0.02%
Labeling according to Regulation (EC) No 1272/2008
GHS Label Elements  Aquatic Toxicity |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H411: Toxic to aquatic life with long lasting effects.
Copper Chloride Dihydrate Cupric Chloride Anhydrous Manufacturers
Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, etc.
Copyright and Usual Disclaimer is Applicable January 26, 2022